LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Oldsmobile >> 2000 >> Intrigue GL >> Repair and Diagnosis >> External Pages >> Different car >> Section 125 (Automatic Transaxle Servicing) >> Removal & Installation >> TCC Pulse Width Modulation Solenoid >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

TCC Pulse Width Modulation Solenoid: Installation

WARNING: This page is about a different car, the 2003 Buick Regal and 2003 Buick Century. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the TCC PWM solenoid (334). See Figure . Install the TCC PWM solenoid retaining clip (314F). Connect the TCC PWM solenoid electrical connector.
  2. Install the oil pump to the valve body. See Figure . Install the oil pump bolts (206 and 207). See Figure . Tighten the bolts (207) to 106 INCH lbs. (12 N.m).
  3. Tighten the bolts (206) to 12 ft. lbs. (16 N.m). Reposition and connect the electrical connectors to the following:
    • Fluid pressure manual valve position switch assembly. See Figure .
    • 2-3 Shift solenoid valve assembly.
  4. Install the case side cover. See CASE SIDE COVER  .
scientia non olet · About LEMON Manuals