Torque Specifications
WARNING: This page is about a different car, the 2002 Oldsmobile Intrigue. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) | |
|---|---|---|
| A/C Compressor Hose Assembly Nut | 24 (33) | |
| Compressor Front Mounting Bolt | 37 (50) | |
| Compressor Rear Mounting Bolt | 18 (24) | |
| Compressor Shaft Nut | 13 (17.5) | |
| Compressor Top Mounting Bolt | 37 (50) | |
| Condenser Tube Block Nut | 20 (27) | |
| Condenser Tube Nut | 20 (27) | |
| Evaporator Block Fitting | 12 (16) | |
| Refrigerant Line Fittings | ||
| Accumulator-To-Evaporator Nut | 35 (48) | |
| At Block Fitting | 12 (16) | |
| At Compressor (Nut) | 12 (16) | |
| At Condenser | 12 (16) | |
| At Evaporator (Bolt) | 12 (16) | |
| Suction Hose-To-Accumulator Nut | 12 (16) | |
| Steering Column Bolts | 18 (24) | |
| INCH Lbs. (N.m) | ||
| A/C Pressure Sensor | 41 (4.6) | |
| Accumulator Strap Bolt | 36 (4.1) | |
| Blower Motor Screw | 12 (1.3) | |
| Blower Motor Resistor Screw | 13 (1.5) | |
| Heater Core Mounting Clip Screw | 13 (1.5) | |
| Heater Core Cover Screw | 13 (1.5) | |
| HVAC Control Assembly Screw | 18 (2.0) | |
| HVAC Module Screw | 89 (10) | |
| HVAC Module-To-Dash Screw | 89 (10) | |
| Pressure Relief Valve | 80 (9.0) | |
| Recirculation Housing Screw | 13 (1.5) | |
| Refrigerant Filter Flare Nut | 133 (15) | |
| Refrigerant Pressure Sensor | 41 (4.7) | |
| Service Fitting | 106 (12) | |
| Temperature Actuator Screw | 13 (1.5) | |
| Vacuum Reservoir Tank Screw | 13 (1.5) | |