Brake Pressure Modulator Valve: Installation

WARNING: This page is about a different car, the 2001 Pontiac Grand Prix, 2001 Pontiac Firebird, 2001 Oldsmobile Intrigue, and 2001 Chevrolet Camaro. However, it is still accessible from the selected car via links, so may be relevant.

To install, reverse removal procedure. Ensure brakelines are installed in original locations. If installing a NEW BPMV, ensure shipping plugs are removed from valve openings. Install NEW wave spring(s) in original location and position between EBCM and BPMV. Install EBCM to BPMV. Install 4 NEW top mounting screws and tighten in an "X" pattern. Install 2 NEW bottom screws and tighten. Tighten screws, nuts and brakelines to specification. See TORQUE SPECIFICATIONS .
Refill brake master cylinder reservoir, bleed brakes and check for leaks. See BLEEDING BRAKE SYSTEM . Turn ignition on, with engine off. Perform DIAGNOSTIC SYSTEM CHECK under DIAGNOSIS & TESTING.