Without Scan Tool
- Ensure driver's door is closed. With ignition switch in OFF position, hold down power unlock button on door panel. Turn ignition switch to ON position, then OFF. Turn ignition switch to ON position, then OFF a second time. Release power unlock button on door panel. RCDLR will respond by locking and then unlocking all doors and unlatching rear window (utility vehicles only) to indicate programming mode.
- Hold down LOCK and UNLOCK buttons on transmitter until RCDLR responds by locking then unlocking all doors and unlatching rear window (utility vehicles only).
- Repeat step 2 for each additional transmitter. Program all extra transmitters at this time. When a new transmitter is programmed, old transmitters will be deactivated.
- Turn ignition switch to ON position to exit programming mode.