Remote Keyless Entry Diagnostic System Check

Install scan tool. If scan tool powers up, go to next step. If scan tool does not power up, see SCAN TOOL DOES NOT POWER UP in appropriate BODY CONTROL MODULES article.
Turn ignition on, engine off. Try to establish scan tool communication with BCM. If communication with BCM is established, go to next step. If communication with BCM is not established, see SCAN TOOL DOES NOT COMMUNICATE WITH CLASS 2 DEVICE in appropriate BODY CONTROL MODULES article.
Select display DTCs function for BCM. Record all displayed DTCs and status of displayed DTCs. If DTCs are displayed, go to next step. If no DTCs are displayed, see SYSTEM TESTS .
If scan tool does not display any DTCs beginning with "U", go to next step. If scan tool displays DTCs beginning with "U", see SCAN TOOL DOES NOT COMMUNICATE WITH CLASS 2 DEVICE in appropriate BODY CONTROL MODULES article.
If scan tool displays DTC B1000, see appropriate BODY CONTROL MODULES article. If scan tool does not display DTC B1000, see DTC B3102: KEYLESS ENTRY DATA LINK CIRCUIT LOW .