Diagnostic Procedures
WARNING: This page is about a different car, the 2001 GMC Sonoma and 2001 Chevrolet S10 Pickup. However, it is still accessible from the selected car via links, so may be relevant.
- Perform powertrain diagnostic system check. See POWERTRAIN DIAGNOSTIC SYSTEM CHECK under SELF-DIAGNOSTIC SYSTEM. After performing diagnostic system check, go to next step.
- Review any service bulletins for software updates that may prevent I/M readiness. Perform any reprogramming or repairs indicated by the service bulletins. If reprogramming or repair service was required, go to INSPECTION/MAINTENANCE COMPLETE SYSTEM SET PROCEDURE . If reprogramming or repair service was not required, go next step.
- Using scan tool, observe the I/M System Status display. If more than one test is indicating a NO status, go to INSPECTION/MAINTENANCE COMPLETE SYSTEM SET PROCEDURE . If a YES status is indicated, go to INSPECTION/MAINTENANCE SYSTEM DTC TABLE .