Without Scan Tool
- Close all doors. Turn ignition switch to OFF position. Remove ignition key from ignition switch. Press and hold driver door lock switch to UNLOCK position.
- Insert and remove ignition key twice (without turning lock cylinder). Insert ignition key a third time, leaving key in ignition in LOCK position. Release door lock switch. Body Control Module (BCM) will sound 3 chimes to verify program mode has been activated.
- Press and hold transmitter LOCK and UNLOCK buttons simultaneously for about 15 seconds. BCM will sound 3 chimes to confirm programming of first transmitter
- Repeat previous step to program up to 4 transmitters. Remove ignition key. Operate transmitter functions to verify correct system operation.