LGM Scan Tool Data List
- Rear Washer Requested
-
The scan tool displays YES or NO. While the rear washer switch is pressed the scan tool displays YES, when the switch is released the scan tool displays NO.
- Rear Wiper Mode
-
The scan tool displays OFF, DELAY 1, DELAY 2, ON, or WASH. The scan tool displays the commanded state of the rear wiper motor by the liftgate control module.
- Requested Rear Wiper
-
The scan tool displays OFF, DELAY 1, DELAY 2, ON, or WASH. The scan tool displays the current rear wiper switch position determined by the switch position data received by the liftgate control module from body control module.
- Liftgate Ajar Switch
-
The scan tool displays the state of the switch.
- Liftglass Ajar Switch
-
The scan tool displays the state of the switch.