LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Oldsmobile >> 2002 >> Bravada AWD >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Shift Interlock Systems >> Removal & Installation >> Floor Shift Control Cable >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Floor Shift Control Cable: Removal

  1. Ensure the transmission is in Park. Raise and support the vehicle. Remove the end of the range selector cable from the transmission range selector lever ball stud (6). See Figure .
  2. Remove the retainer (5) from the range selector cable. Remove the range selector cable (4) from the bracket (1). Remove the cable from the retainer (3) on the floor panel.
  3. If the vehicle is equipped with 4WD, remove the cable from the retainers located on the transfer case. On all models, remove the drivers side front mat and carpet. Push the cable grommet (2) up through the floor panel. See Fig 1 . Lower the vehicle.
  4. Remove the console. See FLOOR CONSOLE  . Remove the end of the range selector cable (1) from the floor control ball stud. See Figure .
  5. Remove the range selector cable (2) from the floor shift control assembly. Remove the tape and grommet on the shift cable from the floor panel. Remove the range selector cable (3) from the vehicle.
Fig 1: Removing & Installing Shift Cable Grommet
G00094576Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals