Installation Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2005 Isuzu Ascender, 2005 GMC Envoy XUV, 2005 GMC Envoy XL, 2005 GMC Envoy, and 2005 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Sliding VCIM Bracket To Seat Bracket

Courtesy of GENERAL MOTORS CORP.

Position the VCIM bracket to the seat bracket.
Slide the VCIM bracket forward until the retaining tabs become locked to the seat bracket.

Fig 2: Removing/Installing VCIM Retaining Tab

Courtesy of GENERAL MOTORS CORP.

Ensure the retaining tab (1) on the VCIM bracket is properly seated.
Install the communication interface module. Refer to Communication Interface Module Replacement (TrailBlazer EXT, Envoy XL) or Communication Interface Module Replacement (Trailblazer, Envoy, Rainier) in Interior Trim.
Position the right second row seat to a passenger position.