LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Oldsmobile >> 2004 >> Bravada AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1742 (Engine Control System - 4.2L - Introduction) >> Repair Instructions >> Throttle Body Assembly Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2005 Isuzu Ascender, 2005 GMC Envoy XUV, 2005 GMC Envoy XL, 2005 GMC Envoy, and 2005 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Throttle Body Assembly
    GM742490Courtesy of GENERAL MOTORS CORP.
  1. Remove the resonator assembly. Refer to Air Cleaner Outlet Resonator Replacement .
  2. Remove the evaporative emission (EVAP) canister purge line from the throttle body.
  3. Disconnect the throttle body electrical connector.
  4. Remove the throttle body assembly retaining bolts (1).
  5. Remove the throttle body assembly (2) and the gasket from the intake manifold.
  6. Clean the gasket surface.
scientia non olet · About LEMON Manuals