LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Plymouth >> 1983 >> Colt Custom, 2D Hatchback, Automatic >> Repair and Diagnosis (Single Page) >> Steering >> Steering Column >> Overhaul >> Steering Column >> Reassembly
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Steering Column: Reassembly

  1. Install steering shaft in steering column and install snap ring. Install and tighten column tube bracket bolt until bolt head snaps off.
  2. Fill bearing with grease and install in end of steering column. Make sure bearing is fully seated. Align steering lock with column boss. Make sure that steering lock is operational (by using ignition key to make lock function) before tightening lock retaining screw.
NOTE: Steering lock retaining screws are special one way design.
scientia non olet · About LEMON Manuals