LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Plymouth >> 1991 >> Laser Base, Standard >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Engine Cooling Fan >> Testing >> Coolant Temperature Sensor Testing
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Coolant Temperature Sensor Testing

  1. Drain cooling system. Remove coolant temperature sensor from lower corner of radiator. Place coolant temperature sensor in water up to the mounting threads.
  2. Heat water to 185°F (85°C) and check continuity between sensor terminals. Ensure continuity exist. Reduce water temperature to less than 172°F (78°C). Check continuity. Continuity should NOT exist. Replace sensor if it does not test as specified.
scientia non olet · About LEMON Manuals