LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Plymouth >> 1995 >> Voyager Base, 2.5 K >> Repair and Diagnosis >> Engine Performance >> System >> EGR Function Testing >> Introduction >> EGR Valve/BACKPRESSURE Transducer Assembly
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

EGR Valve/BACKPRESSURE Transducer Assembly

  1. Check vacuum hoses for correct routing. Warm engine to normal operating temperature. Connect a vacuum pump to EGR valve. With engine idling, slowly apply 2-3 in. Hg. Engine RPM should drop when vacuum is applied.
  2. Disconnect vacuum pump from EGR valve. Connect vacuum gauge to EGR vacuum supply hose. Start engine and raise engine speed to 2000 RPM. Vacuum gauge should read about 5 in. Hg. If test results are as specified, system is okay.
scientia non olet · About LEMON Manuals