LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Plymouth >> 1997 >> Voyager Base, 3.3 R >> Repair and Diagnosis >> Body & Frame >> Body, Cab Control Systems >> Body Control Computer >> Vehicle Communications Tests >> Test VER-2A - Verification Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Test VER-2A - Verification Procedure

  1. Reconnect all previously disconnected components and wiring. Turn ignition on. Use scan tool to erase trouble codes. Turn ignition off and wait at least 5 seconds and then turn ignition on (engine off).
  2. Operate system that was malfunctioning to verify correct operation. If system does not operate properly, go to SYMPTOM ID TEST 1A  in DIAGNOSTIC TESTING. If system operates properly, read fault messages using scan tool. If any codes are present, go to SYMPTOM ID TEST 1A  in DIAGNOSTIC TESTING. If no codes are present, repair is complete.
scientia non olet · About LEMON Manuals