Torque Specifications (3.4L)
TORQUE SPECIFICATIONS (3.4L)
| Application | Ft. Lbs. (N.m) | |
|---|---|---|
| Catalytic Converter Hanger Bolts/Screws | 30 (41) | |
| Center Support Bearing-To-Rear Axle Torque Arm Bolts (Models With 2-Piece Driveshaft) | 37 (50) | |
| Driveshaft-To-Differential Yoke Bolt/Screw | 16 (22) | |
| Fuel Rail Retaining Bolts | 18 (24) | |
| Fuel Tank Strap Bolts | 25 (34) | |
| Harmonic Balancer | 110 (149) | |
| Muffler Hanger | ||
| Bolt | 11 (15) | |
| Nut | 18 (25) | |
| Oxygen Sensor | 30 (41) | |
| Rear Axle Torque Arm Outer Transmission Bracket | ||
| Bolt (Front Lower) | 37 (50) | |
| Bolt (Rear Upper) | 20 (27) | |
| Nut | 30 (41) | |
| Rear Axle Torque Arm-To-Differential Housing Bolts/Nuts | 97 (132) | |
| Rear Axle Track Bar Brace-To-Body Bracket Bolts | ||
| Left | 35 (47) | |
| Right | 80 (108) | |
| Rear Axle Track Bar-To-Left Coil Spring Seat Bolt/Nut | 61 (83) | |
| Rear Axle Track Bar-To-Right Body Bracket | ||
| Bolt | 80 (108) | |
| Nut | 75 (102) | |
| Rear Exhaust Pipe Hanger Nut | 11 (15) | |
| Rear Exhaust Pipe-To-Catalytic Converter Outlet Flange Bolts/Screws | 15 (20) | |
| Rear Shock Absorber Lower Mounting Nut | 66 (90) | |
| Rear Stabilizer Shaft Insulator Clamp Nuts | 18 (24) | |
| Rear Stabilizer Shaft Link Bolts/Nuts | 17 (23) | |
| Throttle Body Bolts | 20 (27) | |
| Wheel Lug Nuts | 100 (140) | |
| INCH Lbs. (N.m) | ||
| Camshaft Position Sensor Bolt | 89 (10) | |
| Crankshaft (3X) Position Sensor Bolt | 71 (8.0) | |
| Crankshaft (24X) Position Sensor Bolt | 89 (10) | |
| Exhaust Heat Shield Bolts/Screws | 18 (2.0) | |
| Fuel Line-To-Fuel Rail Retaining Bracket Screw | 45 (5.0) | |
| Idle Air Control (IAC) Valve Screw | 30 (3.4) | |
| Ignition Coil-To-Module Screws | 40 (4.5) | |
| Throttle Position Sensor Screw | 18 (2.0) | |