Feature Customization

Remote Activation Verification (RAV) Customization Table:

IMPORTANT: If the ignition switch is moved to the "OFF" position during this procedure, the Remote Activation Verification (RAV) customization will be terminated and the system will remain in the most recent mode.

1. Remove the "MALL PGM" fuse from the fuse panel.
2. Turn the ignition to the "ACC" position. The seat belt telltale flashes and the chime bongs one to four times, equal to the current customization mode, to indicate which mode the vehicle is in. Each time the transmitter "LOCK" button is pressed the mode number will advance. A transition past mode four will repeat starting again at mode one.
3. To exit and save the current customization, turn the ignition "OFF" and replace the "MALL PGM" fuse back into the fuse panel. If you desire to customize other features, customize them before reinstalling the "MALL PGM" fuse into the fuse panel.