Diagnostic Aids
WARNING: This page is about a different variant/trim than selected.
A malfunction in HO2S heater circuit will set DTC. Check circuit for intermittent open or faulty connectors. Oxygen supply inside HO2S is provided through wires.
Use of FREEZE FRAME and/or FAILURE RECORDS mode will aid in locating intermittent condition. If DTC cannot be duplicated, information in data can be useful in determining how many miles since DTC set. This mode can also be used to determine how many ignition cycles diagnostic reported a pass and/or fail condition. Operating vehicle within FREEZE FRAME conditions (RPM, load, vehicle speed, temperature, etc.) will isolate when DTC failed.