LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2001 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1391 (Engine Cooling System) >> Repair Instructions >> Radiator Hose Replacement - Inlet >> Installation Procedure
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Installation Procedure

WARNING: This page is about a different car, the 2002 Pontiac Aztek and 2002 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the radiator inlet hose.
  2. Connect the radiator inlet hose to the radiator.
  3. Reposition the hose clamp at the radiator to secure the hose using the J 38185. 
  4. Connect the radiator inlet hose to the thermostat housing.
  5. Reposition the hose clamp at the thermostat housing to secure the hose using the J 38185. 
  6. Fill the cooling system. Refer to Draining and Filling Cooling System .
    Fig 1: Connecting & Installing Radiator Inlet Hose
    G01745773Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals