LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2001 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 603 (Anti-Lock Brake System) >> Description & Operation >> ABS Description & Operation >> Stability System Indicators (JL4) >> Programming the Traction Control Automatic Engagement Feature
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Programming the Traction Control Automatic Engagement Feature

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 Chevrolet Tahoe, 2002 Chevrolet Suburban, and 2002 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

The automatic engagement feature may be programmed so that the traction control system activates or does not activate automatically at the start of each ignition cycle. In order to change the status of the automatic engagement feature, perform the following procedure:

  1. Park the vehicle with the ignition OFF and the transmission in PARK (P).
    NOTE: Failure to follow the correct procedure may cause DTC C0283 to set in EBCM memory.
  2. Turn the ignition ON, engine OFF.
  3. Press and hold the brake pedal and the accelerator pedal.
  4. Press and hold the traction assist switch for 5 seconds.
  5. Release the brake and accelerator pedals and the traction control switch.
  6. Turn the ignition OFF.

scientia non olet · About LEMON Manuals