LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2001 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 655 (Anti-Lock Brake System) >> Description & Operation >> ABS Description & Operation >> Programming the Traction Control Automatic Engagement Feature
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Programming the Traction Control Automatic Engagement Feature

WARNING: This page is about a different car, the 2002 GMC Sierra, 2002 GMC Cab & Chassis Sierra, 2002 Chevrolet Silverado, and 2002 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.

The automatic engagement feature may be programmed so that the traction control system activates or does not activate automatically at the start of each ignition cycle. In order to change the status of the automatic engagement feature, perform the following procedure:

Important:  Failure to follow the correct procedure may cause DTC C0283 to set in EBCM memory.

  1. Park the vehicle with the ignition OFF and the transmission in PARK (P).
  2. Turn the ignition ON, engine OFF.
  3. Press and hold the brake pedal and the accelerator pedal.
  4. Press and hold the traction assist switch for 5 seconds.
  5. Release the brake and accelerator pedals and the traction control switch.
  6. Turn the ignition OFF.
scientia non olet · About LEMON Manuals