Removal Procedure

WARNING: This page is about a different car, the 2002 Pontiac Aztek and 2002 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.

Remove the instrument panel accessory trim plate. Refer to TRIM PLATE REPLACEMENT - INSTRUMENT PANEL (I/P) ACCESSORY (AZTEK) .

Fig 1: Removing Instrument Panel Accessory Trim Plate
Courtesy of GENERAL MOTORS CORP.
Remove the bolts/screws from the switch bank to instrument panel.
Pull straight out from the instrument panel in order to remove the switch bank from the instrument panel.

Fig 2: Removing Switch Bank & Screws
Courtesy of GENERAL MOTORS CORP.
Disconnect the electrical connectors.

Fig 3: Disconnecting Electrical Connectors
Courtesy of GENERAL MOTORS CORP.