No. 6 Security Access Procedure: Procedure
WARNING: This page is about a different car, the 2004 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
- Connect the WDS or equivalent to the DLC-2.
- Select "Body/Security/PATS function" from the WDS or equivalent screen menu.
- Security access is started and the WDS or equivalent displays "Outcode".CAUTION:
- After reading out the outcode, do not turn ignition switch from LOCK to ON position 5 times, otherwise the outcode value will be changed.
- Input the corresponding "Incode" for the "Outcode" displayed on the WDS or equivalent screen.
- After successfully performing security access, "Program Additional Ignition Key", "Ignition key ID number Erase" or "Customer Spare Key Programming Enable/Disable" is displayed on the WDS or equivalent screen. When performing "Parameter Reset", security access is requested two time and after successfully performing it the second time, "Replacement Module" is displayed.