Enter Programming

To enter programming with the DIC, perform the following actions:
1. Turn the ignition to RUN.
2. Place the vehicle in PARK.
3. Press the LOCK button on the keyless entry transmitter whose number corresponds to the correct driver for this session of personalization.
4. Press the MODE button for the DIC until the DIC displays PERSONALIZATION FOR DRIVER # (where # equals the current driver number).
5. Press the SET button for the DIC to enter programming mode.
The PROGRAM MODE indicator illuminates providing the status.
6. The DIC displays PRESS MODE FOR NEXT OPTION and then PRESS SET TO CHANGE OPTION.