Code Enable Criteria

WARNING: This page is about a different variant/trim than selected.

For DTC to run, the following conditions must be met:

DTCs P0101, P0102, P0103, P0117, P0118, P0121, P0122, P0123, P0125, P0336, P0341, P0502, P0503, P1114, P1115, or P1121 are not set.
Engine speed is 1000-2500 RPM.
Throttle angle is more than 10 percent.
Engine load is more than 45 percent.
Engine Coolant Temperature (ECT) is more than 140°F (60°C).
Maximum spark retard is less than 15 degrees.
System voltage is more than 9 volts.
Engine run time is more than 30 seconds.

DTC will set when PCM detects a malfunction in integrated KS diagnostic circuitry which will not allow proper diagnosis of KS system.