Installation Procedure

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 Chevrolet Tahoe, 2002 Chevrolet Suburban, and 2002 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Install the module in the container by pushing on the module until it locks in place.

Fig 1: Connecting Wire Connector To Alarm Module
Courtesy of GENERAL MOTORS CORP.
Connect the wire connector to the alarm module (1).
Installed the cover (1) by pushing on it until it locks in place.

Fig 2: Installing Object Alarm Cover
Courtesy of GENERAL MOTORS CORP.
Slid the container under the rear seat frame.
Install a new cover retainers to the seat frame.
Set the rear seat to its original position.