Installation Procedure
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 Chevrolet Tahoe, 2002 Chevrolet Suburban, and 2002 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
- Install the rear object alarm switch into the housing (2).
- Connect the electrical connector to the switch (1).
- Install the switch housing into the dash.
- Install the dash trim bezel. Refer to BEZEL REPLACEMENT - IP CLUSTER .