LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2002 >> Aztek AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1344 (Rear Parking Assist System) >> Repair Instructions >> Object Alarm Module Switch Replacement - Rear >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 Chevrolet Tahoe, 2002 Chevrolet Suburban, and 2002 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the dash trim bezel. Refer to BEZEL REPLACEMENT - IP CLUSTER .
  2. Grasp the buttons assembly (2) housing and pull outwards.
  3. Fig 1: Rear Object Alarm Module Housing & Switch
    GM741402Courtesy of GENERAL MOTORS CORP.
  4. Disconnect the electrical connector from the rear object alarm module switch.
  5. Remove the switch (1) from the housing (2).