April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 Chevrolet Tahoe, 2002 Chevrolet Suburban, and 2002 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Rear Object Sensor Electrical Connectors

GM489061

Courtesy of GENERAL MOTORS CORP.

Disconnect the electrical connectors to the rear object sensor.

Fig 2: View Of Rear Object Sensor Assembly

GM500502

Courtesy of GENERAL MOTORS CORP.

Lift the locking tabs on the housing (4) and remove the rear object sensor (1).

Fig 3: Releasing Tabs To Remove Spring

GM762443

Courtesy of GENERAL MOTORS CORP.

Insert a small size screw driver at (3) to release the tabs in order to remove the spring (1).

Fig 4: View Of Rear Object Sensor Housing

GM489064

Courtesy of GENERAL MOTORS CORP.

From the inside of the housing push in the tabs and remove.

Fig 5: Painting Rear Object Sensor Bezel

GM489066

Courtesy of GENERAL MOTORS CORP.

Remove the bezel by pushing it through the fascia.