October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Data Link Connector: Service and Repair

REMOVAL PROCEDURE

1. Remove the screws from the data link connector (DLC).
2. Position the DLC from the Instrument Panel (IP).

INSTALLATION PROCEDURE

1. Position the DLC to the IP.

NOTE: Refer to Fastener Notice in Service Precautions.

2. Install the screws to the DLC.

Tighten
Tighten the screws to 2 N.m (18 lb in).