LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2004 >> Aztek Base, AWD >> Repair and Diagnosis >> Engine Mechanical >> Engine Mechanical - 3.4L >> Repair Instructions >> On-Vehicle Repair Instructions >> Engine Oil Level Sensor and/or Switch Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: Identifying Oil Level Sensor & Bolt
    GM888259Courtesy of GENERAL MOTORS CORP.
  1. Install the oil level sensor to the oil pan.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the oil level sensor bolt.

    Tighten:  Tighten the bolt to 10 N.m (7 lb ft).

    3. Fig 2: View Of Oil Level Sensor Electrical Connector
    GM734310Courtesy of GENERAL MOTORS CORP.
  3. Connect the electrical connector to the oil level sensor.
  4. Lower the vehicle.
  5. Ensure that the engine oil is filled to the proper level.
scientia non olet · About LEMON Manuals