Connecting Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2004 Oldsmobile Bravada, 2004 GMC Envoy XUV, 2004 GMC Envoy XL, 2004 GMC Envoy, and 2004 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Battery Cable Components

Courtesy of GENERAL MOTORS CORP.

Verify that all electrical components are off such as interior lights, all doors are closed, the underhood lamp, etc.
Clean any corrosion from the negative battery cable using a wire brush.
Position the negative battery cable (5) to the battery.
NOTE: Refer to Fastener Notice in Cautions and Notices.
Tighten negative battery cable bolt.
Tighten: Tighten the bolt to 15 N.m (11 lb ft).