LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2004 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 110 (Lighting Systems) >> Repair Instructions >> Tail Lamp Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2004 Oldsmobile Bravada, 2004 GMC Envoy XUV, 2004 GMC Envoy XL, 2004 GMC Envoy, and 2004 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Removing/Installing Tail Lamp Assembly
    GM718032Courtesy of GENERAL MOTORS CORP.
  1. Remove the 2 screws that retain the tail lamp assembly to the body.
  2. Pull the assembly directly rearward in order to release the 2 locking pins.
  3. Disconnect the tail lamp electrical connector.
  4. Remove the lamp assembly from the vehicle.
  5. Remove the tail lamp circuit board. Refer to Tail Lamp Circuit Board Replacement .
scientia non olet · About LEMON Manuals