Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.

Position the accelerator pedal (1) to the vehicle.

Fig 1: Identifying Accelerator Pedal

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the accelerator pedal bolts (2).
Tighten: Tighten the bolts to 5 N.m (44 lb in).
Connect accelerator pedal electrical connector.
Install the left instrument panel sound insulator. Refer to Closeout/Insulator Panel Replacement - Left in Instrument Panel, Gages and Console.