LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2004 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 274 (Engine Controls (Introduction) - 3.8L) >> Repair Instructions >> Boost Control Solenoid Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the fuel injector sight shield. Refer to Fuel Injector Sight Shield Replacement (L26) or Fuel Injector Sight Shield Replacement (L32) in Engine Mechanical - 3.8L.
  2. Disconnect the boost source signal hose (3) from the boost control solenoid (4).
  3. Disconnect the boost control solenoid electrical connector.
  4. Remove the boost control solenoid nut (1).
    5. Fig 1: View Of Boost Control Solenoid
    GM911076Courtesy of GENERAL MOTORS CORP.
  5. Remove the boost control solenoid (4).
scientia non olet · About LEMON Manuals