LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2004 >> Aztek Base, FWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Infotainment >> Cellular Communication System >> Repair Instructions >> Communication Interface Module Replacement >> Removal Procedure
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Removal Procedure

  1. Remove the right insulator panel. Refer to Closeout/Insulator Panel Replacement - Right in Instrument Panel, Gages and Console.
  2. Remove the instrument panel compartment. Refer to Compartment Replacement - Instrument Panel (I/P) in Instrument Panel, Gages and Console.
  3. Remove the screws securing the VCIM bracket to the instrument panel metal brace.
    4. Fig 1: Locating VCIM Bracket To Instrument Panel Metal Brace Screws
    GM725615Courtesy of GENERAL MOTORS CORP.
  4. Disconnect the electrical connectors.
    Fig 2: View Of Communication Interface Module Electrical Connectors
    GM725713Courtesy of GENERAL MOTORS CORP.
  5. Disconnect the cell antenna coaxial cable from the VCIM.
    IMPORTANT: The old VCIM must be returned for core credit.
  6. Remove the VCIM from the bracket and the vehicle.
scientia non olet · About LEMON Manuals