Removal Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2004 Oldsmobile Bravada, 2004 GMC Envoy XUV, 2004 GMC Envoy XL, 2004 GMC Envoy, and 2004 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.

Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
Remove the tire and wheel. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
Remove the shock module yoke to lower control arm mounting nut.

Fig 1: Removing/Installing Shock Module Yoke Lower Mounting Nut
Courtesy of GENERAL MOTORS CORP.
Install J 24319-B to the shock module yoke to lower control arm stud.
Disconnect the shock module yoke from the lower control arm using J 24319-B .

Fig 2: Disconnecting Shock Module Yoke From Lower Control Arm
Courtesy of GENERAL MOTORS CORP.

Fig 3: View Of Shock Module Yoke To Shock Absorber Pinch Bolt & Nut

Courtesy of GENERAL MOTORS CORP.

Remove the shock module yoke to shock absorber pinch bolt and nut.

Fig 4: Spreading Shock Module Yoke

Courtesy of GENERAL MOTORS CORP.

Spread the shock module yoke at the pinch bolt using a flat bladed tool.
Remove the shock module yoke from the shock absorber.