LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2004 >> GTO Automatic >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Cruise Control Systems >> Repair Instructions >> Cruise Control Module Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

  1. Position the cruise control module to the mounting bracket (4).
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the 3 cruise control module retaining screws (2).

    Tighten:  Tighten the cruise control module retaining screws to 3.5 N.m (31 lb in).

  3. Push the connector to the cruise control module (1) until the tang on the wiring harness connector (3), locks in place.
  4. Install the cruise control cable. Refer to Cruise Control Cable Replacement .
    5. Fig 1: View Of Wiring Harness Connector, Cruise Control Module, Bracket & Screws
    GM1375223Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals