Installation Procedure
Courtesy of GENERAL MOTORS CORP.
- Install the traction control switch (1) to the lower housing.
Courtesy of GENERAL MOTORS CORP.
- Install the lower housing (2) to the upper cover (3).
- Install the lower housing, upper cover, gearshift lever, knob and boot as an assembly to the shift lever.
Courtesy of GENERAL MOTORS CORP.
- Install the selector lamp holder (3) to the lower housing (1).
- Connect the traction control switch connector (2).
- Engage the 3 locating tabs of lower housing assembly to the base.
- Install the center console. Refer to Console Replacement - Front Floor
in Instrument Panel, Gages, and Console.
Courtesy of GENERAL MOTORS CORP.
- Install the shifter control knob retaining screw (1).