Information Bus: Service and Repair

Powertrain Interlace Module (PIM) Replacement
Removal Procedure

1. Remove the accelerator and servo control module. Refer to Accelerator and Servo Control Module (ASM) Replacement in Antilock Brakes.
2. Disconnect the electrical connector (2) from the PIM control module.
3. Remove the powertrain interface module (PIM) control module (1) from the vehicle.



Installation Procedure
1. Position the PIM control module (1) to the vehicle.
2. Connect the electrical connector (2) to the PIM control module.
3. Install the accelerator and servo control module.