LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2004 >> Grand Prix GTP >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> Body Control System >> Repair Instructions >> Body Control Module Replacement >> Installation Procedure
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Installation Procedure

  1. Align the BCM to the I/P trim pad.
    2. Fig 1: View Of BCM
    GM1202109Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the BCM screws.

    Tighten:  Tighten the screws to 2 N.m (18 lb in).

    3. Fig 2: View Of BCM Screws
    GM1202105Courtesy of GENERAL MOTORS CORP.
  3. Connect the lower BCM electrical connectors. Engage the cam lock.
    4. Fig 3: View Of BCM Electronic Connectors
    GM1205342Courtesy of GENERAL MOTORS CORP.
  4. Align the I/P steering column opening filler to the I/P trim pad. Press the filler panel to the I/P trim pad.
  5. Install the I/P steering column opening filler screws.

    Tighten:  Tighten the screws to 2 N.m (18 lb in).

    6. Fig 4: View Of I/P Steering Column Opening Filler
    GM928912Courtesy of GENERAL MOTORS CORP.
  6. Install the I/P accessory trim plate. Refer to Trim Plate Replacement - Instrument Panel (I/P) Accessory in Instrument Panel, Gages, and Console.
    7. Fig 5: View Of I/P Accessory Trim Plate
    GM928809Courtesy of GENERAL MOTORS CORP.
  7. Install the ignition switch bezel.
  8. Align the DLC to the I/P trim pad. Install the DLC to the I/P trim pad.
    9. Fig 6: View Of DLC
    GM929643Courtesy of GENERAL MOTORS CORP.
  9. Install the lamp to the left I/P insulator opening.
  10. Align the left I/P insulator to the I/P trim pad.
  11. Install the I/P insulator fasteners.
    12. Fig 7: View Of I/P Insulator
    GM1202960Courtesy of GENERAL MOTORS CORP.
  12. Connect the upper electrical connector to the BCM. Engage the cam lock.
  13. Align the left I/P compartment access hole cover to the I/P trim pad. Press the I/P compartment access hole cover to the I/P trim pad.
    14. Fig 8: View Of Left Instrument Panel Outer Trim Cover
    GM929251Courtesy of GENERAL MOTORS CORP.
  14. Perform the new BCM setup. Refer to Body Control Module (BCM) Programming/RPO Configuration .
scientia non olet · About LEMON Manuals