Child Restraint Tether Anchor Replacement

Removal Procedure

Fig 1: Child Seat Tether Brackets
Courtesy of GENERAL MOTORS CORP.
1. Remove the rear shelf trim panel. Refer to Trim Panel Replacement - Rear Window Shelf in Interior Trim.
2. Remove the screws from the child seat tether brackets.
3. Remove the child seat tether brackets from the rear shelf.

Installation Procedure

Fig 2: Child Seat Tether Brackets
Courtesy of GENERAL MOTORS CORP.
1. Position the child seat tether brackets to the slot in the rear shelf.
NOTE: Refer to Fastener Notice in Cautions and Notices.
2. Install the screws to the child seat tether brackets.

   Tighten:  Tighten the screws to the child seat tether brackets to 20 N.m (15 lb ft).

3. Install the rear shelf trim panel. Refer to Trim Panel Replacement - Rear Window Shelf in Interior Trim.