October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Installation Procedure

Press the IAT sensor (4) into the air cleaner resonator (1).

Fig 1: Locating IAT Sensor
Courtesy of GENERAL MOTORS CORP.
Connect the IAT sensor harness connector.
NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
Connect the air cleaner duct to the air cleaner resonator.
Tighten: Tighten the clamp to 5 N.m (44 lb in).