October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Installation Procedure

NOTE: Refer to FASTENER NOTICE in Cautions and Notices.

IMPORTANT: The KS threaded surfaces must be clean before installation.

Install the knock sensor.

Fig 1: View of Knock Sensor
Courtesy of GENERAL MOTORS CORP.

Tighten: Tighten the knock sensor retaining bolt to 25 N.m (18 lb ft).
Connect the knock sensor harness connector.
Install the starter. Refer to Starter Motor Replacement in Engine Electrical.