Removal Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Monte Carlo and 2004 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.

Note the position of the spark plug wires for the installation and disconnect the spark plug wires from the ignition coils.

Fig 1: View Of Spark Plug Wire Connections To Ignition Coils

Courtesy of GENERAL MOTORS CORP.

Remove the 2 screws (1) securing the ignition coil (2) to the ignition control module (3).
Remove the ignition coil (2).

Fig 2: View Of Ignition Coil Module And Module Mounting Bracket

Courtesy of GENERAL MOTORS CORP.