LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2005 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 20 (Engine Control System 3.8L (Introduction)) >> Repair Instructions >> Accelerator Controls Cable Bracket Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Monte Carlo and 2004 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the fuel injector sight shield. Refer to Fuel Injector Sight Shield Replacement in Engine Mechanical - 3.8L.
  2. Remove the cruise control cable from the throttle body lever.
  3. Remove the cruise control cable (1) from the bracket (2).
  4. Fig 1: Removing Cruise Control Cable
    GM179339Courtesy of GENERAL MOTORS CORP.
  5. Remove accelerator cable from the throttle body lever.
  6. Remove the accelerator cable (2) from the bracket (1).
  7. Fig 2: Removing Accelerator Cable
    GM179346Courtesy of GENERAL MOTORS CORP.
  8. Remove the accelerator controls cable bracket bolts.
  9. Remove the accelerator controls cable bracket from the throttle body.
  10. Fig 3: Removing Accelerator Controls Cable Bracket
    GM12246Courtesy of GENERAL MOTORS CORP.