Installation Procedure
WARNING: This page is about a different car, the 2004 Chevrolet Monte Carlo and 2004 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.
- Install the fuel injector upper O-ring (2).
- Install the fuel injector lower O-ring (4).
- Install the fuel injector (3) to the fuel rail.
- Install the fuel injector retaining clip (1).
- Install the fuel rail. Refer to Fuel Rail Assembly Replacement .
- Inspect for fuel leaks with the following procedure:
- Turn ON the ignition for 2 seconds.
- Turn OFF the ignition for 10 seconds.
- Turn ON the ignition.
- Inspect for fuel leaks.