LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Pontiac >> 2005 >> Aztek Rally, FWD >> Repair and Diagnosis >> Engine Performance >> Testing & Diagnosis >> Engine Controls - 3.4L - Introduction >> Repair Instructions >> Mass Air Flow (MAF) Sensor Replacement >> Removal Procedure
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Removal Procedure

  1. Turn OFF the ignition.
  2. Disconnect the intake air temperature (IAT) sensor electrical connector.
  3. Fig 1: Identifying Mass Air Flow (MAF) Sensor
    GM15974Courtesy of GENERAL MOTORS CORP.
  4. Disconnect the mass air flow (MAF) sensor (1) electrical connector.
  5. Remove the air inlet duct from the MAF sensor and the throttle body.
  6. Remove the MAF sensor from the air filter housing.