Installation Procedure
- Position the amplifier in the vehicle.
- Install two screws (7), securing the antenna amplifier to the vehicle.
Tighten: Tighten the antenna amplifier screws to 7 N.m (62 lb in).
- Connect three connectors (5, 4, 3), from the antenna amplifier module (6).
- Connect the AM antenna connector (2), and the FM antenna/demister connector (1), to the rear window connectors.
- Install the rear quarter upper trim panel. Refer to Trim Panel Replacement - Rear Quarter Upper in Interior Trim.
- Check for radio reception.
NOTE:
Refer to Fastener Notice
in Cautions and Notices.