TPMS Reset Procedures: Notes
NOTE:
2004-06: When a wheel is replaced or rotated, tire pressure has been adjusted or vehicle's battery has been disconnected, TPM system will need to be recalibrated. See TIRE PRESSURE MONITOR SYSTEM RECALIBRATION (2004-06) .
NOTE:
2007-08: The sensor learn procedure must be performed after every tire rotation, RCDLR replacement, or sensor replacement. See TIRE PRESSURE SENSOR LEARN (2007-08) .
2004-06: When the tire pressure warning light illuminates and warning message appears on DIC, immediately check air pressure of all tires and adjust to the specified pressure. Reset TMPS. Ensure warning indicators go out.
2007-08: When the TPM system detects a significant loss, or gain of tire pressure, the "CHECK TIRE PRESSURE" message is displayed on the DIC and the low tire pressure indicator is displayed on the IPC. Both the message and indicator can be cleared by adjusting the tires to the recommended pressures.